Error Message on Boxes

TOO CLOSE OR FAR APART

This pops up on the screen when the Network and Coverage Units are too far away to communciate with each other or too close to offer much boost.

I am sure you know what to do here.

hardware error OF DEATH

I have never seen this personally, but it is worth a mention.

It is a hardware error indicator, try restarting the unit mentioned on the screen and if it persists then contact our technical department.

NO SIGNAL MESSAGE

The Network Unit cannot receive a Signal from the network, or is unable to connect to a tower. Visit the Network Connection section on how to fix.

TOO HOT....TOO HOT!

One of the boxes is running too hot, this could be due to the weather, lack of ventilation or being in direct sunlight.

Try moving the box to a different location and ensure the vents are not blocked. This feature helps protect the hardware from failure, once cooled down the system will start again automatically.

signal too strong MESSAGE

The input signal from the mobile network is too strong to use a repeater. Too strong…..are you kidding me? Yes the signal can be too strong.

Try moving the Network Unit or the external antenna if using one to a different location.

If the error persists then contact our technical department.

OTHER ERRORS

You may come across a few other errors, which are detailed in the quick start guide.

Contact our technical department if you have any concerns.