Cel-Fi PRO for Digicel PNG 3G & 4G
Cel-Fi PRO for Digicel PNG 3G & 4G
The Cel-Fi Repeater has been tested, authorised and approved by Digicel for use on the Digicel Mobile Network.
Nextivity’s third generation Cel-Fi PRO is a cost-effective and intelligent indoor coverage solution for the Digicel 3G and 4G networks operating on the 3G 900/2100Mhz and 4G 1800/2600 bands. It is designed to dramatically boost indoor voice quality and increase data speeds for HSPA or LTE consumers.
Note: Cel-Fi PRO will boost 3G 900/2100 and only one 4G band, either 1800 or 2600 (not both 4G bands at the same time).It does not support the 4G 700 band.
The Cel-fi PRO differs greatly from the standard indoor repeater due to its ability to not interfere with the mobile network or other users. Often referred to as a Smart Repeater, the Cel-Fi has the ability to provide maximum coverage, be network friendly and can be easily installed by the end user.
It does this in several ways by
- continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi’s output power to suit.
- only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
- not interfering with the carrier’s network or other users on the network.
- having a unique installation process to eliminate feedback into the mobile network.
Cel-Fi PRO is covered by a 24 month warranty.
Features
Easy 5 Minute Setup
Up to 900m² indoor coverage area
Locked to the Digicel Mobile Network
Mobile Network Protection
External Antenna Port
LCD Display
30 Day Money Back Guarantee*
If you are not 100% happy with the performance of this product it can be returned within 30 days after purchasing for a full refund minus any shipping charges… terms and conditions
Disclaimer *Credit provided by Oxipay Pty Ltd. Terms, conditions, late payment fees and lending criteria apply. See www.powertec.com.au/oxipay-terms.
Downloads
Cel-Fi for Digicel 4G Brochure
Supported Networks
Digicel, Amaysim, Dodo, iiNet, plus more
Easy Purchasing Procedure
Specifications
FREQUENCY
|
UMTS/3G 900/2100 – Band 8 & 1 |
DATA
|
UMTS / HSPA / HSPA+/ LTE (FDD) |
GAIN
|
Up to 100 dB system gain |
PROCESSOR
|
Nextivity IntelliBoost Ares |
NETWORK UNIT
|
H: 179mm |
COVERAGE UNIT
|
H: 160mm W: 164mm D: 79mm Weight: 450g |
ENVIRONMENT |
Operating Temperature: 0° to 40°C Storage Temperature: -25° to 60°C Relative Humidity: 5 to 95% noncondensing |
POWER |
12 VDC via external supply (2 included) External Supply: 100-240 VAC, 47-63Hz Power Consumption: <25W per unit |
INTERFACES |
External Antenna Port: SMA Female Programming Ports: Mini-USB Bluetooth Low Energy |
WIRELESS LINK |
5 GHz link compliant U-NII |
CERTIFICATIONS |
CE Mark |
* 30 Day Money Back Guarantee – Customer must return the Cel-Fi repeater within 30 days of receiving if the product does not perform to their expectations. Item must be returned with all packaging and parts in original condition. Refund component does not include any shipping charges paid.