Cudy
The Cudy WB10K Kit 1.0 is a pre-paired 5 GHz Wi-Fi 6 outdoor wireless bridge designed for point-to-point network connections across distances of up to 10 km with suitable line of sight. It delivers wireless speeds up to 2402 Mbps using two internal directional antennas with a 70° horizontal × 15° vertical beamwidth, supporting high-capacity links for CCTV systems, farms, factories, warehouses, remote facilities and building-to-building networking. A 2.5 Gigabit Ethernet port provides PoE input, while a separate Gigabit Ethernet port supports PoE output for compatible downstream equipment. Multiple power methods, IP65 outdoor protection, operation from -40°C to 65°C and 6 kV common-mode surge protection support deployment in demanding outdoor network environments.
Delivering high-speed wireless connectivity where physical Ethernet cabling is impractical, the bridge kit provides a dedicated link between buildings, surveillance networks and remote infrastructure. Its Wi-Fi 6 performance, 2.5GbE interface, PoE capabilities and outdoor-rated construction support reliable long-distance network deployment.
| Model Version | WB10K Kit 1.0 |
| Wireless Bridge Type | Point-to-Point |
| Pre-Paired | Yes |
| CPU | 1.3 GHz Dual-Core |
| Flash / ROM | 128 MB (1 Gbit) NAND |
| DDR / RAM | 256 MB (2 Gbit) DDR3 |
| Wi-Fi Standard | Wi-Fi 6 |
| Wireless Frequency | 5 GHz |
| 5 GHz Wi-Fi Speed | Up to 2402 Mbps |
| Spatial Streams | 2 |
| Wi-Fi Antennas | 2 × Internal Directional |
| Beamwidth | 70° horizontal × 15° vertical |
| Maximum Range | 10 km (6.2 miles) |
| Maximum Wi-Fi Modulation | 1024-QAM |
| Wi-Fi Channel Width | Auto / 20 / 40 / 80 / 160 MHz |
| Wi-Fi Security | WPA / WPA2 / WPA3 |
| 2.5 Gigabit Ethernet Ports | 1 × RJ45 |
| Gigabit Ethernet Ports | 1 × RJ45 |
| ETH0 | PoE Input |
| ETH1 | PoE Output |
| Power Input Type | DC Jack / PoE via Ethernet |
| DC Input | 12 V DC, 1 A |
| Passive PoE Input | 48–57 V DC |
| PoE Input | 802.3at |
| PoE Output | 802.3af/at via ETH1 |
| Maximum Power Consumption | 24 W with PoE output / 9 W without PoE output |
| Idle Power Consumption | 5.4 W |
| Included Power Adapter Input | 100–240 V AC, 50/60 Hz |
| Included Power Adapter Output | 12 V DC, 1 A |
| DC Plug Size | 5.50 ± 0.05 mm OD × 2.10 ± 0.05 mm ID |
| Operating Modes | PtP Base Station / PtP Client |
| Installation Utilities | Antenna Alignment / Speed Test / Interference Detection |
| Local Management | Web Configuration / App Control |
| Remote Management | App Control |
| Firmware Upgrade | Local Update / App OTA / Online Update |
| System Reliability | Backup and Restore |
| Diagnostic Tools | Diagnosis |
| LED Indicators | Signal Strength / Ethernet / System |
| Physical Buttons | Reset / WPS |
| Surge Protection | IEC/EN 61000-4-5, Common Mode 6 kV / Differential Mode 4 kV |
| ESD Protection | IEC/EN 61000-4-2 Level 4, Contact 8 kV / Air 15 kV |
| Ingress Protection | IP65 |
| Operating Temperature | -40°C to 65°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 0% to 100% non-condensing |
| Storage Humidity | 0% to 100% non-condensing |
| Installation | Wall Mount / Pole Mount |
| Dimensions | 240 × 100 × 53.7 mm |
| Certifications | FCC / CE |
| Kit Contents | WB10K Kit / PoE Adapter / Power Cord / Ethernet Cable / Installation Guide / Mounting Kit |
| General Information | |
|---|---|
| Manufacturer: | Cudy |
| Manufacturer Part Number: | WB10K KIT |
| Packaging Details | |
| Weight: | 1.00 KGS |
| Width: | 28.00 (cm) |
| Height: | 11.00 (cm) |
| Depth: | 28.00 (cm) |