Cudy
The Cudy WB05 Kit 1.0 is a pre-paired 2.4 GHz outdoor wireless bridge designed to establish point-to-point network connections across distances of up to 500 m. It delivers Wi-Fi 4 wireless speeds up to 300 Mbps through two internal directional antennas with 7 dBi gain and a 105° × 80° beamwidth, supporting applications such as connecting separate buildings, farms, campuses and remote surveillance systems. Two 10/100 Mbps Ethernet ports provide network connectivity, with ETH0 supporting PoE input and ETH1 capable of 802.3af PoE output when the bridge is supplied from a suitable 48 V passive PoE source. An IP55-rated enclosure, wide operating temperature range and 4 kV surge protection support installation in exposed outdoor environments.
Providing a dedicated wireless link between physically separated network locations, the bridge kit reduces the need to install Ethernet cabling across open areas or between buildings. Its directional antennas, outdoor-rated construction, PoE capabilities and installation utilities support remote networking and IP surveillance deployments.
| Model Version | WB05 Kit 1.0 |
| Wireless Bridge Type | Point-to-Point |
| Pre-Paired | Yes |
| CPU | 580 MHz Single-Core |
| Flash / ROM | 8 MB (64 Mbit) NOR |
| DDR / RAM | 64 MB (512 Mbit) DDR2 |
| Wi-Fi Standard | Wi-Fi 4 |
| Wireless Frequency | 2.4 GHz |
| 2.4 GHz Wi-Fi Speed | Up to 300 Mbps |
| Spatial Streams | 2 |
| Wi-Fi Antennas | 2 × Internal Directional |
| Antenna Gain | 7 dBi |
| Beamwidth | 105° horizontal × 80° vertical |
| Maximum Range | 500 m (1640 ft) |
| Maximum Wi-Fi Modulation | 64-QAM |
| Wi-Fi Channel Width | Auto / 20 / 40 MHz |
| Wi-Fi Security | WPA / WPA2 / WPA3 |
| Ethernet Ports | 2 × 10/100 Mbps RJ45 |
| ETH0 | PoE Input |
| ETH1 | PoE Output |
| Power Input Type | DC Jack / PoE via Ethernet |
| DC Input | 12 V DC, 1 A |
| Passive PoE Input | 12–57 V DC |
| PoE Output | 802.3af at ETH1 |
| Maximum PoE Output | 15 W |
| Maximum Power Consumption | 19 W with PoE output / 2.4 W without PoE output |
| Idle Power Consumption | 1.4 W |
| Included Power Adapter Input | 100–240 V AC, 50/60 Hz |
| Included Power Adapter Output | 12 V DC, 1 A |
| DC Plug Size | 5.50 ± 0.05 mm OD × 2.10 ± 0.05 mm ID |
| Camera Capacity | Up to 3 × 8 MP cameras at 500 m |
| Operating Modes | PtP Base Station / PtP Client |
| Installation Utilities | Antenna Alignment / Speed Test / Interference Detection |
| Local Management | Web Configuration / App Control |
| Remote Management | App Control |
| Firmware Upgrade | Local Update / App OTA / Online Update |
| Diagnostic Tools | Diagnosis |
| LED Indicators | System / Signal Strength / Ethernet |
| Physical Button | Reset |
| Surge Protection | IEC/EN 61000-4-5 Level 4, CM 4 kV |
| ESD Protection | IEC/EN 61000-4-2 Level 4, Contact 8 kV / Air 15 kV |
| Ingress Protection | IP55 |
| Operating Temperature | -30°C to 60°C |
| Operating Temperature with Normal Air Flow | -30°C to 70°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 5% to 90% non-condensing |
| Storage Humidity | 0% to 100% non-condensing |
| Installation | Wall Mount / Pole Mount |
| Dimensions | 179.7 × 37.2 × 44 mm |
| Certifications | FCC / CE |
| General Information | |
|---|---|
| Manufacturer: | Cudy |
| Manufacturer Part Number: | WB05 KIT |
| Packaging Details | |
| Weight: | 1.35 KGS |
| Width: | 23.00 (cm) |
| Height: | 10.00 (cm) |
| Depth: | 30.00 (cm) |