Sierra Wireless AirLink RX400 5G RedCap Industrial Router with Wi-Fi

Low-Power 5G RedCap Industrial Router with Wi-Fi for Remote Infrastructure

Built for remote assets and critical infrastructure, the rugged industrial router combines 5G RedCap and LTE connectivity with integrated 1×1 MIMO Wi-Fi 6, dual SIM support, dual-band GNSS, Gigabit Ethernet and RS-232 serial connectivity. Wi-Fi operates across 2.4 GHz and 5 GHz bands with Access Point and client functionality, theoretical peak throughput up to 600 Mbps and support for up to 16 clients per radio. Its sealed IP64 aluminium housing supports operation from -40°C to +70°C, while a 7–36 VDC input, USB-C redundant power input, low-voltage disconnect and transient protection support battery, solar and vehicle-powered installations. AirLink OS provides routing, VPN, security and management functionality, while Docker container support enables edge computing for utilities, oil and gas, SCADA, metering and other industrial applications.

Key Features

• 5G RedCap Connectivity: Supports 5G RedCap with LTE connectivity and 2×2 cellular MIMO for remote industrial and critical infrastructure applications.
• Integrated Wi-Fi 6: Provides single 1×1 MIMO Wi-Fi 6 connectivity across the 2.4 GHz and 5 GHz frequency bands.
• Wi-Fi Access Point and Client: Supports dual-band Access Point operation together with Wi-Fi client functionality for Depot/WAN connectivity.
• Wi-Fi Performance: Delivers theoretical peak Wi-Fi throughput up to 600 Mbps with support for up to 16 clients per radio.
• Wi-Fi Security: Supports WPA2/WPA3 Personal, WPA2/WPA3 Transitional and WPA2 Enterprise security for client operation.
• Global Cellular Band Support: Supports a broad range of 5G NR and 4G LTE frequency bands, with carrier-specific band support dependent on the applicable network configuration.
• Dual SIM Capability: Uses dual Nano-4FF SIMs to provide flexible cellular network deployment options.
• Industrial Wired Connectivity: Provides a single 1 Gbps Ethernet interface and single or dual RS-232 serial connectivity for integration with industrial equipment.
• Dual-Band GNSS: Integrated dual-band GNSS provides positioning capability for applications requiring location information.
• Flexible DC Power: Accepts 7–36 VDC input with redundant power input available through USB-C at 15 W.
• Power Management: Includes standby mode, low-voltage disconnect, ignition sense with delayed shutdown and configurable features and ports to optimise power consumption.
• Power Protection: Built-in protection addresses voltage transients, including 5 VDC engine cranking and +200 VDC load dump conditions.
• Rugged Environmental Design: The sealed aluminium housing carries an IP64 rating and operates from -40°C to +70°C with storage from -40°C to +85°C.
• Industrial Networking: Supports IPv4 and IPv6 routing, NAT, port forwarding, DHCP server, IP passthrough, LAN segmentation, policy-based routing and static routing.
• Secure VPN Connectivity: Supports IPsec with IKEv1/IKEv2, AES128/AES192/AES256 encryption, SHA256/SHA384/SHA512 hashing and up to 10 concurrent tunnels per link.
• Edge Computing Support: Supports Docker containerised edge-computing applications with approximately 600 MB RAM and 500 MB flash storage available to containers depending on enabled features.
• Remote Management: AirLink Management Service is available through the included 1-year AirLink Complete subscription, with local web interface and optional AirLink Manager and AirLink Mobility Manager platforms.
• Compact Installation: Measures 117.3 × 33 × 85 mm, or 117.3 × 33 × 94 mm including SMA connectors, with a weight of 350.5 g.

Integrated Wi-Fi expands local connectivity options while retaining 5G RedCap, LTE and wired interfaces within a compact industrial platform. Its rugged enclosure, flexible power architecture and remote management capabilities support connected infrastructure operating across demanding fixed and mobile environments.