Skip to main content

Victron Energy

Victron Blue Smart IP65 Battery Charger 24/13(1) 230V AU/NZ

0 review Write a Review
Blue Smart 24-volt, 13-amp waterproof battery charger for Lithium, AGM and GEL batteries with inbuilt Bluetooth and quick-connect leads.
SKU: ENG-VT-00176
MPN: BPC241331014
Shipping: Calculated at Checkout
$342.60 inc GST
$311.45 ex GST
Hurry up! Current stock:

Victron Blue Smart IP65 Battery Charger 24/13(1) 230V AU/NZ

$342.60 inc GST
$311.45 ex GST

Victron Blue Smart IP65 Battery Charger

The Blue Smart IP65 Charger is a professional battery charger packed with features such as built-in bluetooth to the Victron Connect App (Available on both iOS and Android). The Blue Smart IP65 Battery Chargers are ideal for use on cars, camper vans, caravans, RV's, tractors, motorcycles and boats and in the garage or on the farm.

Features:

  • Water, dust and chemical resistant
  • Seven step smart charge algorithm
  • Potential recovery of fully discharged ‘dead’ batteries
  • Automatic power supply function
  • Severe cold performance: down to -30°C
  • Several other battery life enhancing features
  • Temperature compensated charging
  • Low power mode to charge smaller batteries
  • Li-ion battery mode
  • Ultra high 95% efficiency “green” battery charger
  • Setup and configure, readout of voltage and current by Bluetooth Smart

The battery is charged, smartly and to perfect condition

The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life. Victron Blue Smart Chargers also feature a Storage Mode for less corrosion of the positive plates, typically most chargers only offer up to a float mode, the problem is that the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.

Recovery of deeply-discharged 'dead' batteries

Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Connect the battery with ease with Quick Fit connection

The charger comes supplied with both alligator clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected to your battery. Additional Quick Connects and Accessories are also available to purchase separately.

Check the status of your battery remotely

The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The VictronConnect app allows you to Setup, readout and configure your Blue Smart IP65 Charger via your smartphone (Apple and Android). You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available.

Battery Reconditioning

A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.

Blue Smart IP65 Charger
Specification Category Details
Input Voltage 120 VAC
Efficiency 94% (12V) | 95% (24V)
Standby Power Consumption 0.5W
Minimum Battery Voltage Starts charging from down to 0V
Charge Voltage 'Absorption' 12V: Normal: 14.4V | High: 14.7V | Li-ion: 14.2V
24V: Normal: 28.8V | High: 29.4V | Li-ion: 28.4V
Charge Voltage 'Float' 12V: Normal: 13.8V | High: 13.8V | Li-ion: 13.5V
24V: Normal: 27.6V | High: 27.6V | Li-ion: 27.0V
Charge Voltage 'Storage' 12V: Normal: 13.2V | High: 13.2V | Li-ion: 13.5V
24V: Normal: 26.4V | High: 26.4V | Li-ion: 27.0V
Charge Current 12V: 4A / 5A / 7A / 10A / 15A
24V: 5A / 8A
Charge Current in Low Current Mode 12V: 2A / 2A / 2A / 3A / 4A
24V: 2A / 3A
Temperature Compensation (Lead-Acid Batteries Only) 12V: 16 mV/°C (9 mV/°F)
24V: 32 mV/°C (18 mV/°F)
Can be Used as Power Supply Yes
Back Current Drain 0.7Ah/month (1mA)
Protection Reverse polarity
Output short circuit
Over temperature
Operating Temperature Range -40 to +60°C (full rated output up to 30°C)
-40 to +140°F (full rated output up to 90°F)
Humidity (Non-Condensing) Max 95%
Battery-Connection Black and red cable of 1.5 meters (4.9 feet)
120V AC-Connection Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug
Protection Category IP65 (splash and dust proof, and ignition protected)
Weight 0.9 kg (2 lbs)
Dimensions (h x w x d) 12V / 7A: 47 x 95 x 190 mm (1.8 x 3.7 x 7.5 in)
Other / 24V / 8A: 60 x 105 x 190 mm (2.3 x 4.1 x 7.5 in)
Standards Safety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29
Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
General Information
Manufacturer: Victron Energy
Manufacturer Part Number: BPC241331014
Barcode: 8719076051572
Packaging Details
Weight: 0.90 KGS

Customers Also Viewed

Review Your Cart Close Close
Your cart is empty

Recently viewed

Recently Viewed Recently Viewed
Social Media Social Media
Top Top