![TP-Link TL-SG1016D 16-Port Gigabit Desktop/Rackmount Switch Front TP-Link TL-SG1016D 16-Port Gigabit Desktop/Rackmount Switch Front](https://cdn11.bigcommerce.com/s-49v18nqssl/images/stencil/600x600/products/1740/3081/TL-SG1016D-01__79424.1717110723.jpg?c=1)
![TP-Link TL-SG1016D 16-Port Gigabit Desktop/Rackmount Switch Box TP-Link TL-SG1016D 16-Port Gigabit Desktop/Rackmount Switch Box](https://cdn11.bigcommerce.com/s-49v18nqssl/images/stencil/160w/products/1740/3082/TL-SG1016D-02__06801.1717110724.jpg?c=1)
TP-Link
TL-SG116P is an unmanaged switch with 16 Gigabit ports that requires no configuration and provides 16 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
16 RJ45 ports of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs)
Overload Arrangement
TL-SG116P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 120 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
Intelligent Power Management
Priority (port 1 > port 2 > port 3>... > port 16): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port.
TL-SG116P is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 16-Port Gigabit Desktop Switch with 16-Port PoE+ TL-SG116P is a great selection for expanding your network.
HARDWARE FEATURES |
|
---|---|
Interface | • 16× 10/100/1000Mbps RJ45 Ports • AUTO Negotiation • AUTO MDI/MDIX |
Network Media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) |
Fan Quantity | Fanless |
External Power Supply | External Power Adapter (Output: 53.5 VDC / 2.43 A) |
Packet Forwarding Rate | 23.8 Mpps |
PoE Ports (RJ45) | • Standard: 802.3 af/at compliant • PoE Ports: Ports 1–16 • Power Supply: 120 W |
Mac Address Table | 8K, Auto-learning, Auto-aging |
Switching Capacity | 32 Gbps |
Dimensions ( W x D x H ) | 11.3 × 4.4 × 1.0 in (286 × 111.7 × 25.4 mm) |
Max Power Consumption | • 11.72 W (220 V / 50 Hz no PD connected) / 11.56 W (110 V / 60 Hz no PD connected) • 142.51 W (220 V / 50 Hz with 120 W* PD connected) / 144.28 W (110 V / 60 Hz with 120 W* PD connected) |
Max Heat Dissipation | • 39.85 BTU/h (220 V / 50 Hz no PD connected) / 39.31 BTU/h (110 V / 60 Hz no PD connected) • 484.53 BTU/h (220 V / 50 Hz with 120 W* PD connected) / 490.55 BTU/h (110 V / 60 Hz with 120 W* PD connected) |
SOFTWARE FEATURES |
|
---|---|
Advanced Features | • Compatible With IEEE 802.3af/at Compliant PDs • Extend Mode Button (Ports 1–4, Up to 250 m PoE power supply and data transmission) • Priority Mode Button (Ports 1–4) • Isolation Mode Button (Ports 1–7 / 8-14) • PoE Auto Recovery (Ports 1-16) • Mac Address Auto-Learning And Auto-Aging • IEEE 802.3x Flow Control • 802.1p/DSCP QoS • IGMP Snooping |
Transfer Method | Store-And-Forward |
OTHERS |
|
---|---|
Certification | FCC, CE, RoHS |
Package Contents | • TL-SG116P • Power Adapter • Installation Guide |
Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing |
General Information | |
---|---|
Manufacturer: | TP-Link |
Manufacturer Part Number: | TL-SG116P |
Packaging Details | |
Weight: | 2.00 KGS |
Width: | 12.00 (cm) |
Height: | 3.00 (cm) |
Depth: | 29.00 (cm) |