TP-Link
TP-Link
TP-Link TL-SG1008P 5-Port Gigabit Desktop Switch with 4-Port PoE
TP-Link TL-SG1008P 5-Port Gigabit Desktop Switch with 4-Port PoE
TL-SG1005LP/TL-SG1005P is a 5 10/100/1000 Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
TL-SG1005P Switch Features:
- 5× 10/100/1000 Mbps RJ45 ports
- With four PoE+ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 65 W for all PoE ports*
- Up to 250m data and power transmitting range under Extend Mode**
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and Play, no configuration and installation required
Power Over Ethernet (PoE)
Four of the 5 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).
Overload Arrangement
The switch has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is over the PoE power budget, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
Intelligent Power Management
Priority (port 1>port 2>port 3>port 4): This function will help protect the system if the system power becomes overloaded. Take TL-SG1005P as an example. If port 1, 2 and 4 are consuming 15.4W respectively, and an additional PoE device with 19 W is inserted to port 3, the system will cut off the power of port 4 to compensate for the overload.
Highlight Performance
- Up to 250 m PoE power supply and data transmission under Extend Mode for port 1-4.
- With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-8. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.
Easy of Use
The switch is easy to install and use. It requires no configuration and installation. With desktop and wall-mountable design, outstanding performance and quality, the TP-Link 5-Port Gigabit Desktop Switch with 4-Port+ PoE is a great selection for expanding your network.
HARDWARE FEATURES |
|
---|---|
Interface | 5 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX |
Network Media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) |
Fan Quantity | Fanless |
External Power Supply | External Power Adapter(Output: 48VDC / 1.25A) |
Packet Forwarding Rate | 7.44 Mpps |
PoE Ports (RJ45) | Standard: 802.3 at/af compliant PoE Ports: Port1- Port4 Power Supply: 56W |
Mac Address Table | 2K |
Jumbo Frame | 16 KB |
Switching Capacity | 10 Gbps |
Dimensions ( W x D x H ) | 3.9×3.9×1.0 in (99.8×98×25 mm) |
Max Power Consumption | 3.95W(220/50Hz. no PD connected) 64.44W(220/50Hz. with 56W PD connected) |
Max Heat Dissipation | 13.48BTU/h(no PD connected) 219.87BTU/h(with 56W PD connected) |
SOFTWARE FEATURES |
|
---|---|
Advanced Features | Compatible With IEEE 802.3 at/af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE 802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping |
Transfer Method | Store-And-Forward |
OTHERS |
|
---|---|
Certification | FCC, CE, RoHS |
Package Contents | • TL-SG1005P • Power Adapter • Installation Guide |
Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing |
General Information | |
---|---|
Manufacturer: | TP-Link |
Manufacturer Part Number: | TL-SG1005P |
Packaging Details | |
Weight: | 0.50 KGS |
Width: | 9.00 (cm) |
Height: | 9.00 (cm) |
Depth: | 2.00 (cm) |