Powertec Dual-Mount 698-4000MHz 3.5-6dBi Ceiling Antenna N/F

PACKAGE CONTENTS

• Powertec Dual-Mount Ceiling Antenna 698-4000MHz
• Threaded Fixing Nut
• Screws & Anchors
• Metal Mounting Plate

MOUNTING – Above Ceiling Mount (Roof Cavity)

1. Drill a 2.5cm (1 inch) in the ceiling. The hole should be large enough to allow the antenna’s threaded plastic cable base to pass through.
2. Push the antenna into the ceiling surface with antenna cable passing through the ceiling hole.
3. Use the Threaded Fixing Nut to secure the antenna by tightening around the threaded plastic cable base
4. Connect N female antenna connector to N male low-loss cabling.

MOUNTING – Below Ceiling mount (Solid Ceiling)

1. Drill a 2.5cm (1 inch) in the ceiling. The hole should be large enough to allow the antenna’s threaded plastic cable base to pass through.
2. Use the Metal Mounting Plate to align, mark and drill 6 holes into the ceiling surface and insert provided anchors.
3. Secure Metal Mounting Plate to the ceiling by inserting provided screws through the mounting plate (with interlocking pegs facing down) and into ceiling anchors.
4. Push the antenna towards the bracket allowing the cable to pass through the ceiling hole. Align keyhole mounts on the antenna with down-facing pegs and twist them into place.
5. Connect N female antenna connector to N male low-loss cabling.