| Specification |
Description |
| Product |
03 - G70 BLE |
| Dimensions |
126 x 80 x 27 mm (4.96 x 3.15 x 1.06 in) |
| Housing |
Non-branded nylon glass housing suitable for white labeling. Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the device can withstand impact, fine dust, and brief submersion. |
| Installation |
10 wire harness, 1m length |
| Operating Temperature |
-30°C to +60°C (connected to external power). At < 0°C and > +40°C, the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures. Recommended Storage: 10°C to 30°C, Humidity 30%. Store in a cool, dry place. |
| IP/IK Rating |
IP68 and IK08 |
| 3-Axis Accelerometer |
To detect movement, high G-force events, and more. |
| Diagnostic LED |
Indicates operation status. |
| Flash Memory |
Stores records if the device is out of cellular coverage. |
| Onboard Speed and Heading |
The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes. |
| Onboard Temperature |
Provides ambient temperature but may not be suitable for precise temperature logging purposes. |
| Connectivity |
| Cellular Module |
Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands (supports roaming across networks – roaming SIM required).
Supported LTE bands:
LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66 |
| Bluetooth® Gateway |
Bluetooth 5.2 gateway reports nearby Bluetooth tags and sensors. |
| SIM Size and Access |
Internal Micro 3FF SIM |
| GNSS Module |
u-blox MIA-M10Q |
| Constellations |
Concurrent GPS, GLONASS, Galileo, BeiDou, QZSS |
| Tracking Sensitivity |
-167 dBm industry-leading tracking performance. |
| Location Accuracy* |
1.5m CEP |
| GNSS Assistance |
GNSS almanac and ephemeris data for greater sensitivity and position accuracy. |
| Low Noise Amplifier |
GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail. |
| Cell Tower Location |
Cell tower location fallback for positioning when GPS can’t get a fix. |
| Power |
| Input Voltage |
8-33V DC (max) |
| High-Performance Automotive Power Supply |
Stringent power “load dump” tests are conducted to ensure operation in the harshest automotive electrical systems. Built-in self-resetting fuse makes installation simple and safe. |
| Intelligent Power Management |
Device enters sleep mode when the vehicle is inactive to prevent battery drain. |
| Operating Current |
~70mA – Average (max) |
| Sleep Current |
<1mA (no peripherals supplied and battery fully charged). |
| Backup Battery |
3.7V 1100mAh LiPo internal backup battery pack. |
| Interfaces |
| Analog Input |
1 x Analog Input 0-40V |
| Digital Inputs |
3 x Digital Inputs with configurable pull-up/down, 0-48V DC input range. On/Off thresholds:
Pull-up enabled: low at 0.4V, high at 1.9V
Pull-down enabled: low at 0.8V, high at 2.2V. Can be used for pulse counting.
*Digital Input 3 pin shared with Driver ID. Cannot be used in conjunction with Wiegand or TTL readers. |
| Digital Outputs |
1 x Switched Ground Digital Output – 2A max. Easily wired up to switch external lights, relays, buzzers, etc. Can be used to immobilize a vehicle. |
| Ignition |
1 x dedicated ignition Digital Input 0-48V DC, 2.2V on/off threshold. May be used as a digital input if not required. |
| Switched Power Out |
3-5V out, Max current 500mA |
| TTL Interface |
Serial interface used to connect a Digital Matter RFID reader for Driver ID. |
| Wiegand |
Wiegand Interface enables easy integration with a variety of RFID card types and readers. Existing employee access badges or IDs can be used with a Wiegand reader for driver ID, permission-based actions, and theft prevention, eliminating the hassle of issuing additional ID cards or fobs. |
| 1-Wire® or iButton® |
1-Wire® or iButton® can be used to read Driver ID tags. Readers available to suit multiple card formats. |
