PABX & Voice Solutions Products
Powertec offer a range of Gateways to provide voice and internet solutions where a landline based connection is not available, or where the copper network has been converted to the NBN.
The gateways act as an interface between multiple connectivity options including VOIP, 3G/4G, E1/PRI, ISDN/BRI and PSTN networks on a single platform.
Common solutions we offer include:
phone system to mobile network or nbn
The Matrix and 2N Gateways allow a phone system to make and receive calls transparently without a landline connection. They utilize a sim card and provide dial tone to the phone system via a PSTN, BRI, PRI or VoIP connection. They also support flexible and intelligent Least Cost Routing (LCR) which has been proven to lead to significant cost savings and round-the-clock connectivity. The gateways can support a single mobile line for the smaller gateways, up to 32 mobile lines for the larger gateways using primary rate (but can go up to 48 if using VoIP.).
If the NBN has replaced a traditional copper connection, then the Matrix range of VoIP gateways offer a way to connect a traditional phone system to the NBN network.
emergency phone to mobile network
If your emergency phone does not have access to a traditional phone line, our range of Matrix and 2N gateways is the answer. They can be connected to the mobile network using a mobile gateway that utilises a sim card to provide dial tone to your device. Calls go out over the mobile network without the user knowing with crystal clear voice. Battery backup and hot dial functionality is available on the gateways.
lift to phone mobile network
If your lift phone is being disconnected due to the NBN, or you simple can’t get access to a copper line, then a Matrix and 2N gateways can help. Gateways take a sim card from any operator and provide dial tone to the lift phone. One of the other benefits is the low yearly cost of a sim card is much cheaper than running and maintaining a cable connection to the lift phone. Battery backup and hot dial functionality is available on the gateways.
Property owners and managers in charge of lifts need to be on the front foot when it comes to being in control of the emergency procedures for their elevators. One easy way to enhance the safety of a property is to ensure that all elevators have updated and functional communications devices that can be used for real-time monitoring, automated alarms, fault recording and more.
Installing a fully compliant lift gateway provides you with the following options for your emergency elevator communications system:
- Built in 4-hour battery backup
- SMS notification during low battery or power outage
- Programmable emergency numbers
- Connect to the Emergency Service Centre for immediate assistance
- Carrier grade and proven reliability
alarm system to mobile network
Mobile Gateways can be the answer when copper lines to an alarm system are being replaced with the NBN, or when you need the security of a wireless mobile connection. The Matrix and 2N Gateways support POTS commands, DTMF and voice used by some alarm systems. Battery backup functionality is available on the gateways for when power outs occur.
In addition to our office range of gateways, we supply a range of industrial cellular routers ideal for fast and reliable Internet connectivity, enhanced voice capabilities – perfect to respond to and manage any device, anytime and anywhere.