Cel-Fi GO Telstra DAS Pack 1

SKU: RPR-CF-00062
In Stock
Inclusive Tax$1,650.33

The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within a building. Supporting voice and mobile internet for multiple mobile devices, boosting your indoor mobile coverage has never been easier.

The Cel-Fi DAS kit adopts the principles of a distributed antenna system used when a larger coverage are is required. The signal output of the GO is divided using a high isolation splitter and multiple service antennas distribute the signal to different rooms or floors.

FEATURES

Show Details

LSFH-240 Cable N Male - SMA Male

This cable is low smoke halogen, to reduce the amount of toxic and corrosive gas emitted during combustion or fire.

Choose your own cable length.

Cable Type: PT240 LSHF

Cable Length: 6m/ 10m/ 15m/ 20m

Connector: N male to SMA male

10m

Blackhawk LPDA 698-2700 MHz 11/12 dBi

Features

  • 11 dBi gain across lower bands 698-960 MHz
  • 12 dBi gain across upper bands 1710-2700 MHz
  • Ruggedised construction for Australian conditions
  • Fully welded, powdercoat aluminium design
  • Stainless steel mounting clamp included
  • 30 cm tail with pre-terminated N Female connector
  • Ideal for high speed 3G and 4G LTE applications.

Ideal for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G.

Operating on all 3G and 4G frequencies in Australia and abroad, this high grade antenna can be used in a range of residential, commercial, and industrial mobile broadband applications on any mobile network. This is the ideal external antenna for Cel-Fi repeater systems.

The Blackhawk Wideband LPDA Antenna provides an ideal solution for 3G / 4G voice and data applications. With the rollout of new 3G and 4G frequencies such as 700 MHz 4GX and 2600 MHz 4G, traditional Yagi antennas just haven't been able to keep up. LPDA antennas allow a single antenna to cover all frequencies with the high gain of a Yagi antenna that rural and remote areas demand. This one antenna can be used on any mobile phone network in Australia, in any area without worrying about compatibility.

A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptionally wideband performance by phasing a series of elements together, much like an ordinary yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.

No Cable

Instock Wireless 700-2700Mhz DAS Splitters/ Combiners N/F, RoHS, High Isolation

These splitters have high 'Port-to-Port Isolation' and are recommended for DAS applications:

  • Min: 22dB
  • Avg: 30dB
  • Connection: N Female

These Instock Wireless Splitters are wideband, 50 ohm, RF power divider, power combiner with type-N female coaxial connectors. They are RoHS compliant and has high port to port isolation, recommended for DAS applications. Up to 40 watts can be handled in both power combiner and splitter applications. Optimal RF performance for all wireless band frequencies in the 698-2700 MHz range.

Available for: 2-Way, 3-Way, 4-Way, 6-Way and 8-Way splitter applications

 

2-Way Splitter

LSHF-400 Cable N Male - N Male

This cable is low smoke halogen, to reduce the amount of toxic and corrosive gas emitted during combustion or fire.

Choose your own cable length.

Cable Type: LSHF-400

Cable Length: 6m/ 10m/ 15m/ 20m/ 25m/ 30m/ 40m/ 50m

Connector: N male to N male

10m

Cable RG58 75cm N Male - SMA Male

Cable Type: RG58

Cable Length: 75cm cable

Connector: N Male and SMA Male

 

In Stock

In Stock

  • No products to compare
Cart Item Removed. Undo
  • No products in the cart.