Cel-Fi GO Repeater for Telstra – Mobile Pack
Cel-Fi GO Repeater for Telstra – Mobile Pack
Cel-Fi GO Repeater has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.
The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your car, 4WD, or truck. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.
– Cel-Fi GO Mobile Model
– Pulse Magentic Low Shadow Base Antenna with 3.5m cable
– Indoor Panel Antenna with 3m cable
– 12v Cigarette Lighter DC 5m Lead
Designed for vehicles and moving transport applications
100dB of system gain (latest software update required using WAVE App)
Includes external and internal antennas
Locked to Telstra’s Mobile Network
Band Selection Button
30 Day Money Back Guarantee*
If you are not 100% happy with the performance of this product it can be returned within 30 days after purchasing for a full refund minus any shipping charges… terms and conditions
Disclaimer *Credit provided by Oxipay Pty Ltd. Terms, conditions, late payment fees and lending criteria apply. See www.powertec.com.au/oxipay-terms.
Telstra, Aldi Mobile, Boost Mobile, Woolworths Mobile
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
WAVE App Registration
Once you receive your Cel-Fi it will need to be registered and activated using the Cel-Fi Wave App, available on iPhone, Android, PC and Mac.
In order to do this you will need internet access on your phone or computer.
We no longer need to collect your information before the Cel-Fi GO or PRO for Telstra product is shipped.
Further information can be found at https://cel-fi.com.au/blog/registration/
UMTS/3G 850 – Band 5
UMTS / HSPA / HSPA+/ LTE (FDD)
Up to 100 dB system gain
Button for band selection:
Will only boost between these signal levels:
|Operating Temperature: 0° to 65°C|
Storage Temperature: -25° to 65°C
Relative Humidity: 0 to 95% noncondensing
|12 VDC via external supply (2 included)|
External Supply: 100-240 VAC, 47-63Hz
Power Consumption: <15W per unit
|External Antenna Ports: Donor and Service SMA Female|
Programming Ports: Mini-USB
Bluetooth Low Energy
Cel-Fi GO is a state of the art, very complex “Smart Repeater” and is approved by Telstra if installed correctly.
It is guaranteed to provide massive signal enhancement in poor reception areas, however incorrect installation may significantly reduce performance.
Installation of a Cel-Fi GO is best done by a qualified installer. Only qualified Powertec Telecommunication Resellers who have undertaken product training on the required precautions should perform installation of the Cel-Fi GO.
Vehicular Cel-Fi GO Packs in particular require you to take into account the vehicle’s safety mechanisms such as airbags, ABS, Traction Control, Stability Control and the auto electrics. Incorrect installation may result in water leaks, electrical failure, battery damage, fusing of internal wiring and cables or risk of FIRE. Misuse of this equipment could result in injury and equipment damage. In no event will Powertec Telecommunications P/L be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment.
If the above precautions are not fully understood, or if local conditions are not covered, contact your nearest Powertec Telecommunications sales or service representative for clarification.
You should also be familiar with applicable federal, state and local legislation and industry standards surrounding installations.
YOU SHOULD BE TRAINED IN HANDLING, INSTALLING, OPERATING AND MAINTAINING THE CEL-FI GO BEFORE YOU WORK ON ANY CEL-FI GO SYSTEM.
Cel-Fi GO Blog Posts
* 30 Day Money Back Guarantee – Customer must return the Cel-Fi repeater within 30 days of receiving if the product does not perform to their expectations. Item must be returned with all packaging and parts in original condition. Refund component does not include any shipping charges paid.
* Telstra Approval – Customers must undertake an approval process to determine the product is suitable for their location. A Telstra approval form will need to be completed and signed by the customer.
® is a registered trade mark of Telstra Corporation Limited. ABN 33 051 775 556