Cel-Fi PRO for Spark 3G850 & 4G700/1800

The Cel-Fi PRO Repeater has been tested, authorised and approved by Spark for use on the Spark New Zealand Network.

Nextivity’s third generation Cel-Fi PRO is a cost-effective and intelligent indoor coverage solution for the Spark 3G and 4G networks operating on the 3G 850Mhz and 4G 700/1800 bands. It is designed to dramatically boost indoor voice quality and increase data speeds for HSPA or LTE consumers.

Note: Cel-Fi PRO will boost 3G 850 and only one 4G band, either 700 or 1800 (not both 4G bands at the same time).

The Cel-fi PRO differs greatly from the standard indoor repeater due to its ability to not interfere with the mobile network or other users. Often referred to as a Smart Repeater, the Cel-Fi has the ability to provide maximum coverage, be network friendly and can be easily installed by the end user.

It does this in several ways by

  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi’s output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.

Cel-Fi PRO is covered by a 24 month warranty.

Features

  Easy 5 Minute Setup

  Up to 900m² indoor coverage area

  Locked to the Spark network

  Mobile Network Protection

  External Antenna Port

  LCD Display

  Bluetooth WAVE App for iPhone, Android & Computers


30 Day Money Back Guarantee*
If you are not 100% happy with the performance of this product it can be returned within 30 days after purchasing for a full refund minus any shipping charges.

Downloads

Cel-Fi for Vodafone PRO Brochure

Cel-Fi PRO Quick Start Guide

Supported Networks

Spark New Zealand & Skinny

Easy Purchasing Procedure

Specifications

FREQUENCY

UMTS/3G 850 – Band 5
Uplink: 824 – 849 MHz, Downlink: 869 – 894 MHz
4G 700/1800 – Band 28 & 3
Uplink: 703 – 733 MHz, Downlink: 758 – 788 MHz
Uplink: 1710 – 1785 MHz, Downlink: 1805 – 1880 MHz
(Will only boost one 4G frequency at a time)

DATA

UMTS / HSPA / HSPA+/ LTE (FDD)

GAIN

Up to 100 dB system gain

PROCESSOR

Nextivity IntelliBoost Ares

NETWORK UNIT

H: 179mm
W: 155mm
D: 110mm
Weight: 540g

COVERAGE UNIT
H: 160mm
W: 164mm
D: 79mm
Weight: 450g
ENVIRONMENT
Operating Temperature: 0° to 40°C
Storage Temperature: -25° to 60°C
Relative Humidity: 5 to 95% noncondensing
POWER
12 VDC via external supply (2 included)
External Supply: 100-240 VAC, 47-63Hz
Power Consumption: <25W per unit
INTERFACES
External Antenna Port: SMA Female
Programming Ports: Mini-USB
Bluetooth Low Energy
WIRELESS LINK
5 GHz link compliant U-NII
CERTIFICATIONS

CE Mark
C-TICK
FCC

* 30 Day Money Back Guarantee – Customer must return the Cel-Fi repeater within 30 days of receiving if the product does not perform to their expectations. Item must be returned with all packaging and parts in original condition. Refund component does not include any shipping charges paid.