Telstra, Aldi Mobile, Boost Mobile, Woolworths Connect
Demountable buildings, known as dongas, are notorious for blocking mobile phone and internet signal. This is caused by the use of metal sheeting on outside walls and roof, creating a total signal blackspot. If signal is fine outdoors then a small antenna is usually enough when placed on the roof. Construction and mining means paperwork, so we’ve included a magnetic-style antenna that can be quickly stuck on the roof outside without needing to arrange work at heights permits and so on.
Cel-Fi GO will boost a single band at a time: 3G (850 MHz) or 4G (700 or 1800 MHz). With Telstra expecting to switch off the last 3G tower by 2024, 4G 700 MHz will be the main voice network using a technology called VoLTE. However at the moment some phone models, particularly older and dual-sim phones, don’t support VoLTE. While 4G will provide faster mobile internet, it can be a good idea to leave GO in 3G mode to make sure voice calls are received on these older phones.
CEL-FI SET UP
- Cel-Fi GO Stationary for Telstra
- Pulse Magnetic Low Shadow Base Antenna 698-2700MHz 4/5.6dB with 3.5m cable
- Adhesive Panel Antenna 698-2700MHz with 3m cable
- 240v Power Supply